Camcorder & Battery » Canon » 7.4V, 4500mAh CANON BP-512 Camcorder Battery replacement

7.4V, 4500mAh CANON BP-512 Camcorder Battery replacement

 

Product Information
Product ID: VCN010
Battery Type: Li-ion
Voltage: 7.4V
Capacity: 4500mAh
Color: grey
Dimensions: 55.10x38.20x59.53mm
Condition: Brand New with 1 Year Warranty!
Compatible Part Numbers: CANON : BP-508, BP-511, BP-511A, BP-512, BP-514, BP-522 ,BP-535
Remark Battery will not show the remain using time
Work with the following models:

CANON:

  DM-MV100X  DM-MV100Xi  DM-MV30
  DM-MV400  DM-MV430  DM-MV450
  DM-MVX1i  FV10  FV100
  FV2  FV20  FV200
  FV30  FV300  FV40
  FV400  FV50  FVM1
  FVM10  IXY DVM  MV300
  MV300i  MV30i  MV400i
  MV430i  MV430IMC  MV450i
  MV500  MV500i  MV530i
  MV550i  MV600  MV600i
  MV630i  MV650i  MV700
  MV700i  MV730i  MV750i
  MVX100i  MVX150i  MVX2i
  MVX3i  Optura 10  Optura 100MC
  Optura 20  Optura 200MC  Optura 50MC
  Optura Pi  Optura Xi  PV130
  ZR10  ZR20  ZR25
  ZR25MC  ZR30  ZR30MC
  ZR40  ZR45MC  ZR50MC
  ZR60  ZR65MC  ZR70MC
  ZR80  ZR85  ZR90
 
Canon BP-512 Camcorder Battery Articles & Tips

A new Canon BP-512 Camcorder Battery comes in a discharged condition and must be charged before use (refer to the devices manual for charging instructions). Upon initial use (or after a prolonged storage period) the digital camcorder Canon BP-512 may require three to four charge/discharge cycles before achieving maximum capacity. New Canon BP-512 needs to be fully charged and discharged (cycled) a few times before it can condition to full capacity. Rechargeable batteries undergo self-discharging when left unused. Always store a Camcorder Battery pack in a fully charged staged for storage.When charging the Canon BP-512 for the first time the device may indicate that charging is complete after just 10 or 15 minutes. This is a normal phenomenon with rechargeable batteries. Remove the camcorder batteries from the device, reinsert it and repeat the charging procedure

It is important to condition (fully discharge and then fully charge) the Canon BP-512 every two to three weeks. Failure to do so may significantly shorten the battery's life (this does not apply to Li-ion batteries, which do not require conditioning). To discharge, simply run the device under the battery's power until it shuts down or until you get a low battery warning. Then recharge the battery as instructed in the user's manual. If the battery will not be in use for a month or longer, it is recommended that Canon BP-512 be removed from the device and stored in a cool, dry, clean place.

Invest in a good charger for your camcorder. Ni-MH batteries should not be charged in a NiCad charger, unless the charger is specifically made for both chemistries. There are cheap chargers and there are expensive chargers. Make sure the charger you get has good reviews and is well made. Chargers with micro-controller chips are usually the best choice of your digital camcorder.

Be sure to store your Camcorder Battery properly. Do not leave your batteries in a hot car, or in humid conditions. The best storage conditions are a cool, dry place. The refrigerator is fine if you stick in a packet of silica gel with your Canon BP-512 in a sealed bag to keep them dry. It is a good idea to charge your NiCad or Ni-MH batteries fully before use if they have been in storage.
Copyright © 2002-2010 Camcorder-Battery.org
All rights reserved. All offers and prices are subject to change without notice.
Laptop Batteries | Camcorder Batteries | Digital Camera Batteries | Battery Chargers | Power Tool batteries
Main Brands: Acer  Compaq  Dell  Fujitsu HP  IBM  NEC  SAMSUNG  Sony  Toshiba 
Camcorder Batteries Popular Brands: CANON  FUJIFILM  HITACHI  SONY  NIKON  PANASONIC  JVC  KODAK  KONICA  SAMSUNG
Our office hours: 8:30 a.m. - 5:00 p.m., Monday - Friday.
Orders or questions? order@camcorder-battery.org
Your ultimate source for camcorder battery and battery charger
7.4V, 4500mAh CANON BP-512 Camcorder Battery replacement

Camcorder Battery for Canon BP-512.